Home > Event Id > Windows Cannot Access The File Gpt.ini For Gpo 1058

Windows Cannot Access The File Gpt.ini For Gpo 1058

Contents

As per Microsoft: "These issues may occur when the Distributed File System (DFS) service is stopped on the domain controller". x 1 Tobias Punke I had this problem when I deactivated the DNS Client service but it was not fixed by simply restarting the DNS Client. It helped me to resolve this problem. It would at times, quit for a few hours and then start up again. http://justjoomla.net/event-id/event-id-1509-windows-cannot-copy-file-access-is-denied.html

x 6 Anonymous I had this error after replacing a defective network card. In other words, your hosts file should look like this (if you have just two domain controllers): yourdomainname.com yourdomainname.com Where = the IP address of D.Press OK". In the Application event log event id 1704 ("Security policy in the Group policy objects has been applied successfully.") was recorded.

Windows Cannot Access The File Gpt.ini For Gpo 1058

It could also be caused due to one of the following, which is basically a blurb on AD & DNS requirements, and things to follow, and things to lookout for. Ace, below are the IPconfig results of both DC and W/S Domain Controler Microsoft Windows [Version 5.2.3790] (C) Copyright 1985-2003 Microsoft Corp. This seems to have solved my problem. I added the DC that was still up and this fixed the problem.

This has solved my problem. x 1 Nico Baumgartner I have had Userenv events 1030 and 1058 after uninstalling the network card team support on an HP Server. English: This information is only available to subscribers. Windows Cannot Access The File Gpt.ini For Gpo Cn= 31b2f340-016d-11d2-945f-00c04fb984f9 The following steps solved it: 1.

Put in the IP address for your domain controller (the local IP address should be first in the list), and then next to the IP address do not put the host Event Id 1058 On Domain Controller Also, while working through this I discovered that besides the already cool "Resultant Set of Policy" MMC snap-in in Windows XP, there is also a "GPUPDATE" command in Windows XP which, If not, do you see an EventID 1505? The server has two NICs, one of which is disabled.

Finally, I dropped to a command prompt and found this Do you see it?  No, I don't mean my horrible "coloring job" - I mean the Junction pointing to C:\Winnt\path... Kb840669 Windows 2000 Server and Windows Server 2003 do not distinguish between non-ASCII and ASCII characters in account names". I ensured that there are no errors in the event log and then went back and set the GPOs to the same settings they were before. The DNS "folder" “\Forward Lookup Zones\\_msdcs” was supposed to include a Name Server (NS) record for each DNS server.

Event Id 1058 On Domain Controller

This command does not affect any DFS metadata. Kill the mobsync.exe process. 4. Windows Cannot Access The File Gpt.ini For Gpo 1058 This prevents automated programs from posting comments. What Is Gpt.ini File In case you do not have the Windows Server CD on hand, the Windows 2003 SP1 support tools installer can be downloaded from ME892777.

When I tried to open the default domain policy, I received several pop-ups: "There is an inconsistency between the GPO Object in SYSVOL and Active Directory. http://justjoomla.net/event-id/delayed-write-failed-windows-was-unable-to-save-all-the-data-for-the-file-server-2012.html Some other recommendations in regards to this (from newsgroup posts) is to verify that: - DFS service on all DCs is started and set to "Automatic" - there are no FRS but in my file server still the log of 1030 and 1058 is apearing and I have problem with accessing my shares resources. I recreated it and the errors went away after a gpupdate /force. Event Id 1058 Error Code 65

This IP adress is neither a part of your DC configuration nor a part of your subnet. The 1058/1030 errors are a result of a wrong DNS query. I activated the access on this DC and the problem was fixed. http://justjoomla.net/event-id/1340-the-inherited-access-control-list-acl-for-access-control-entry-ace-could-not-be-built.html The /PurgeMUPCache command clears the MUP Cache (duh!) which holds info about DFS and other shares on the client system.

See ME830676 for more details. Dfsutil /purgemupcache x 2 EventID.Net This problem occurs when network address translation (NAT) prevents LDAP requests from reaching services on the domain server. When you attempt to configure a forwader and the forwarding option is grayed out, you need to delete the Root zone (looks like a period), refresh the console and try again.

From a newsgroup post: "Here is what you should do to get rid of this error and of Event ID 1058 on Windows Server 2003.

In the Advanced menu make sure that the most important NIC is on top at the Adapters and Bindings tab. x 1 Joerg Hermanns I had this problem when I accidentally modified the permissions on the SYSVOL share, so that the client computers were not able to read the group policies from the command line. Windows Cannot Query For The List Of Group Policy Objects The key and value are HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GpNetworkStartTimeoutPolicyValue = 60.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Have followed many suggesstions and articles, but the only thing that has worked is to run the dfsutil /PurgeMUPCache command from the command prompt of the affected DC. Do the following: -netsh winsock reset -netsh interface ip reset -reboot the server -reconfigure your ip address -reboot the server. http://justjoomla.net/event-id/event-id-364-windows-server-update-file-cert-verification-failure.html Has anything else been possibly altered, or installed on the DC?

Alternates as to which DC it afflicts. Have you looked at the links Miles provided? x 3 Scott Truman I had this problem on a multihomed 2003 server when I removed ''unwanted'' bindings and TCP/IP settings” (Client for Microsoft Networks, File and Printer sharing, netbios, etc) From a newsgroup post: "I have begun to receive this error in the event log every 5 minutes.

Delete the temporary Group Policy. By creating an account, you're agreeing to our Terms of Use, Privacy Policy and to receive emails from Spiceworks. Thanks to Walter Russo, he suggested a workaround by adding the IP adresses of each DC to local hosts-file. x 1 Daniel Wilson On my dual-homed Windows Server 2003, this error started to appear after I had removed “Client for Microsoft Networks” and “File and Print Sharing” from the external

and the problem was fixed. The solution turned out to involve re-installation of drivers, clients, protocols and services for the network adapters. From the affected DC, run netdom resetpwd /server: /userd:\ /passwordd:*. x 1 Dmitry Akselrod I had this issue on a Windows 2003 DC.

It turned out to be an issue with Symantec Endpoint Protection 11.0 that appeared after installing Windows 2003 SP2 and some hotfixes. The slightly more informative 1058 showed Event Type: Error Event Source: Userenv Event Category: None Event ID: 1058 Date: 29/03/2010 Time: 04:06:30 User: NT AUTHORITY\SYSTEM Computer: DC01 Description: Windows cannot access I checked drivers, netsh, etc for this “ghost” card, but it was nowhere to be found. Go to Network Connections -> Advanced Settings.

Thankshttp://www.virmansec.com/blogs/skhairuddin Sunday, June 13, 2010 6:45 AM Reply | Quote 0 Sign in to vote Dear Ace and Syed Khairuddin, FYI: I have tried the up instraction on the DC. x 121 Rick Passero Userenv errors 1058 and 1030 have occurred on one of our two Windows 2003 domain controllers, twice now. This caused the external interface to get registered in DNS, which was being passed down to the clients. So, why the error 5? (Error code 5) Smelled like a permission issue, even though my administrator account could handle it.

Checked the following Registry values (two of them were not present): HKLM\System\CurrentControlSet\Services\Mup\DisableDFS=0 HKLM\Software\Policies\Microsoft\Windows\NetCache\Enabled=1 HKLM\Software\Microsoft\Windows\CurrentVersion\NetCache\Enabled=1. 3. I've struggled with 1058 and 1030 for months, then I discovered that "TCP/IP NetBIOS Helper Service" was disabled.